Manual tube cutting machinery for tube in straight lengths

Our manual tube cutting machine will perfectly suit the needs in industrial steel tube cutting to a required lengths, starting from straight lengths. Our excellence in tube cutting highlights our values and philosophy of CSM Machinery. Blending decades of experience and new technologies we brought our manual tube cutting machine to perfection.

This device is the best option for small and medium production quantities. With this version of the machine, the loading of the straight length, he tube displacement and the unloading of the cut pieces are done manually by the operator. 

CSM offers the following technologies for manual cutting machine:

  • Score and break cutting system: the score and break system is designed to overcome the problems present on orbital cutting of a similar conception but realized using engraving wheels.
    In particular, this system allows the tube to be cut without deformations on the cut edge. The tube is not cut by blades that insist orthogonally on the wall of the tube, but by the combined action of a scoring tooth (made with a three-edged tool), which progressively removes material along a circular section of the cylindrical wall, thinning it, and a clamp that detaches the tube segment. 
    When changing the diameter of the tube to be cut, the operator needs only 5 minutes to set the machine. 

     

    Technical characteristics

    Material of tubes to be cut Steel, stainless steel, copper and aluminium
    Thickness of the tube to be cut 0,3 - 1,0 mm
    External tube diameter 6 - 22 mm (to be defined)
    Min. length to be cut 100 mm
    Pneumatic supply 6 Bar
    Electrical power 1,2 KW
    Voltage  To be defined (V)
    Time to change cut length 2 min.
    Time to change tube diameter 5 min.
    Cutting time (score and break operation) 2,5 ÷ 3,5 sec.

 

  • Die cutting system with guillotine (hydraulic): with subsequent punching to eliminate the "heart" deformation caused by the cut. This punching operation can be done manually with a punching gun or automatically with indexing table downstream of the tube to be cut. 


    Technical characteristics

    Material of tubes to be cut Steel, stainless steel
    Thickness of the tube to be cut 0,3 - 1,0 mm
    External tube diameter 6 - 22 mm (to be defined)
    Max. length to be cut 6000 mm
    Cutting length  To be defined (mm)
    Cutting tolerance 0,5 - 1 mm
    Installed power 12 KW
    Voltage To be defined (V)
    Time to change cut length with the same diameter 4 - 5 min.
    Time to change tube thickness 4 - 5 min.
    Time to change tube diameter 5 - 10 sec.

 

Global Presence

AZ Elettronica

more

CSM Transforming