CSM Machinery has a long experience in coil preparation and is able to propose a number of solutions in pin-coil welding.
According to the required production rates, these devices feature coil-pin-plug assembly units with manual, semi-automatic or full-automatic function.
The pin-coil welding manual machine, with inverter control, is equipped with an accurate electronic welding control with the possibility to set up to 300 welding programs with 32 parameters. In this way the device allows proper adjustment of welding according to type and diameter wire. This version is designed for small batch production and the quality of the welding depends only on the skill of the operator.
To solve these problems, for bigger batch production CSM MACHINERY offers a pin-coil semi-automatic welding machine. This machine allows automatic welding of coils to terminal pins of manually preassembled pins-coils. The operator places assembled pins-coils in the walking beam, which automatically transfers them from the loading position to the welding station and then to the unloading at the end of the cycle.
This version of the machine is equipped with a pneumatic device to align pins-coils under the welding electrode to guarantee repeatability and precision of the welding process in the desired point.
The semi-automatic version of the welding machine allows:
Technical characteristics
Cycle time | 3 - 4 sec. |
Terminal pin lenght | 45 - 200 mm |
Terminal pin diameter | 2,5 - 4 mm |
Coil length | 100 - 1200 mm |
Coil OD | 1,8 - 4 mm |
Power supply | To be defined (V) |
Installed power | 15 KVA |
Pneumatic supply | 6 Ate |
Water supply | 2 l/min. |
Welding machine | To be defined |
Dimensions | 2325 x 1245 x 1770 mm (a x b x h) |
Weight | 400 kg |
Set-up times | 2 - 3 min. |