CSM MACHINERY designed the plug-to-pin assembly machine for assembling plastic plugs to the bottom terminal pins. It is suitable for enhancing the production process in line with modern production needs.
The automatic machine to assemble the plastic plugs on the bottom terminal pins is ideal when the welding between the spiral and the pin is performed manually.
The concrete advantages that make the difference
aligning with CSM MACHINERY’s automation solutions.
ensuring high productivity.
supported by advanced technologies.
Discover all the machine details
NOTE
No set up is required neither when changing the length of the terminal pins nor when the plastic plugs are in the same position with reference to the terminal pin end.
AUTOMATIC VIBRATING FEEDER FOR PLASTIC PLUGS
The vibrator is complete with specific bowl for each type of plastic plug, and a guide (track) to carry the plug to the assembly position.
NOTE
The speeds of this assembly device depend on the quality of the plugs being assembled. The plugs must absolutely be free of burrs (otherwise they can not be fed properly and jam on the bowl tracks) and the dimensions must be consistent. Not complying with this will cause the machine to stop require the attention of the operator and the rates (cycle times) indicated will not be met. The terminal pins must be straight for the same reasons.
AUTOMATIC FEEDER FOR BOTTOM TERMINAL PINS
All terminal pins must be positioned in a suitable container with their points in the same direction.
ELECTROPNEUMATIC DEVICE TO ASSEMBLE PLUGS ON TERMINAL PINS AND TO UNLOAD THEM AT THE END OF THE CYCLE.
Plastic plug | To be defined (dwg) |
Terminal pin diameter | To be defined (mm) |
Max. terminal pin length | 400 mm |
Power supply voltage | To be defined (V) |
Pneumatic supply | 6 Ate |
Discover the other products in our range
