The manual tube cutting machine manufactured by CSM MACHINERY is designed to cut straight tubes to the desired length. This machine is particularly well-suited for small to medium-sized production batches.
With this specific model, tube loading, material advancement, and cut piece unloading are all carried out manually by the operator.
The concrete advantages that make the difference
Discover all the machine details
SUPPORT TABLE FOR TUBES UP TO 6 m LENGTH
ELECTRONIC CONTROL
CUTTING UNIT
MECHANICAL STOP to set the cutting length
The score and pull-apart system is designed to overcome the problems presented with orbital cutting of a similar conception but realized using engraving wheels. In particular, this system allows the tube to be cut without deformations on the cut edge. The tube is not cut by blades that insist orthogonally on the wall of the tube, but by the combined action of a scoring tooth (made with a three-edged tool), which progressively removes material along a circular section of the cylindrical wall, thinning it, and a clamp that detaches the tube segment.
The saw cutting system incorporates a high-resistance circular blade that rotates at high speed to perform rapid and clean cuts. This technology offers the capabilities to manage different types of tube thickness, as well as different materials, with the precision of ninety-degree cuts. Furthermore, thanks to the robust materials and the cutting technique, the tool’s lifespan is extended, ensuring sustained durability and reliability.
Guillotine cutting lines are designed for producing custom-sized tubes with the internal diameter calibrated at both ends and customized lengths. This type of system is primarily selected for medium to large-scale production, ensuring rapid cutting diameter changeovers. The subsequent punching operation, used to eliminate the “heart-shaped” distortion caused by the cut, can be performed manually via a punching gun or automatically with a punching transfer system downstream of the tube cutting.
The score and pull-apart system is designed to overcome the problems presented with orbital cutting of a similar conception but realized using engraving wheels. In particular, this system allows the tube to be cut without deformations on the cut edge. The tube is not cut by blades that insist orthogonally on the wall of the tube, but by the combined action of a scoring tooth (made with a three-edged tool), which progressively removes material along a circular section of the cylindrical wall, thinning it, and a clamp that detaches the tube segment.
If you frequently need to cut tubes with different diameters, CSM MACHINERY’s manual tube cutting line from bars lets you change the machine’s settings in only 5 minutes. Discover how!
Material of tubes to be cut | Steel, stainless steel, copper and aluminium |
Thickness of the tube to be cut | mm 0,3 - 1,00 |
External tube diameter | mm 6 - 22 (to be defined) |
Min. length to be cut | mm 100 |
Pneumatic supply | Ate 6 |
Electrical power | KW 1,2 |
Voltage | To be defined (V) |
Time to change cut length | min. 2 |
Time to change tube diameter | min. 5 |
Cutting time (score and break operation) | sec. 2,5÷ 3,5 |
Discover the other products in our range
